Products

Find the emergency lighting systems for your project.
Reference

ALYA IP65 – LYP3400LW

ALYA IP65 SMARTZ 390lm M/NM 1h IP65/IK07 WHITE 230V 50Hz
ZEMPER Self-Contained, ALYA IP65 series, reference LYP3400LW, Non-maintained type, with SmartZ control system, IP65 protection rating, IK07 impact resistance and Class II insulation.
Manufactured in Polycarbonate, color White RAL9003.
Polycarbonate anti-panic + escape route lens.
Light source: 6xLED 0.5W, 4000K colour temperature.
Supply voltage: 230V 50Hz.
Power factor 0.4.
Emergency mode power consumption 0,9 W.
Includes 3.2V-1.5Ah LiFePOâ‚„ battery providing 1 h autonomy and reaching full charge in 12 h, ensuring an emergency luminous flux of 390 lm.
Equipped with Self-test system.
Suitable for installation on normally flammable surfaces.
Installation type: Ceiling/Wall Surface.
Manufactured in Spain in compliance with standards: EN-60598-1, EN-60598-2-22, EN-62034, EN-303-446-1.
Warranty
5
Years
Share
Imagen de referencia
Imagen de referencia
Imagen de referencia
Imagen de referencia
Imagen de referencia
Imagen de referencia
Imagen de referencia
Imagen de referencia
Imagen de referencia
Imagen de referencia
Imagen de referencia

Product

Functional Specifications

Control system
SmartZ
AutoTest
Yes
Type
Non-maintained
Supply
230V 50Hz<0.9W
Power factor
40%
Non-maintained mode consumption
0,9 W
Emergency
390 lm
Duration
1 h
Battery
3.2V-1.5Ah LiFePOâ‚„
Charging time
12 h

Mechanical and Aesthetic Specifications

Mounting
Ceiling/Wall Surface
Insulation
Class II
Ingress Protection
IP65
Impact protection
IK07
Lamp
6xLED 0.5W
LED color temperature
4000K
Body material
Polycarbonate
Finish
White RAL9003
Diffuser / Optics
Polycarbonate anti-panic + escape route lens
Working temperature
0~40 °C
Suitable for flammable surface
Yes

EN-60598-1

EN-60598-2-22

EN-62034

EN-303-446-1

CE
CE declaration of conformity
UK
UKCA declaration of conformity
CMIM
Morocco Declaration of Conformity

Installation type:

· Ceiling/Wall surface.

Possibility of connection with:

· Recessed wiring.

This luminaire is compatible with the SmartZ® intelligent emergency lighting management system, designed to facilitate maintenance and installation control. Thanks to its 2.4 GHz wireless communication capability, it creates a dynamic mesh network that allows the connection of more than 10,000 luminaires without the need for any additional wiring.

The system simplifies real-time monitoring by issuing automated alerts in case of potential failures, eliminating the need for any manual inspections.

Additionally, it has the facility to integrate with other systems, both wired and wireless.

If not connected to the mesh network, the luminaire will default and operate in Autotest mode, automatically performing the detailed tests listed below.  

Microprocessor controlled luminaire that performs periodic and automatic tests.
Functional test every 7 days.
Duration test every 365 days.
The test result is shown in the status indicator LEDs.
The luminaire has status LEDs, which indicates:
Green on: correct operation
Green flashing: test in progress
Orange on: incorrect battery or duration
Orange flashing: functional failure
Both leds off: no power supply or total failure of the luminaire
EvaMixto
HABCD
2 m3,7 m9,0 m5,6 m13,5 m
2,5 m4,1 m10,0 m5,8 m15,1 m
3 m4,2 m11,0 m5,8 m16,2 m
4 m4,3 m11,6 m5,8 m16,5 m
5 m4,5 m11,9 m5,0 m16,7 m

Spacing data calculated with no reflections and a maintenance factor of 0.9.

Compliant with the updated standard EN-1838:2024.

Minimum illuminance of 1 lux over a 1 m wide evacuation path.

The calculation of spacing distances is carried out considering the height of the light emission point, without taking into account the dimensions of the luminaire.

Antipa
HABCD
2 m6,3 m9,5 m4,5 m9,5 m
2,5 m7,2 m12,0 m4,8 m9,5 m
3 m8,1 m11,5 m5,4 m11,5 m
4 m8,1 m13,0 m5,7 m13,5 m
5 m8,1 m15,0 m5,7 m14,5 m

Spacing data calculated with no reflections and a maintenance factor of 0.9.

Compliant with the updated standard EN-1838:2024.

Minimum illuminance of 0.5 (anti-panic calculation).

The calculation of spacing distances is carried out considering the height of the light emission point, without taking into account the dimensions of the luminaire.

Product weight: 0.39 kg

Boxed product weight: 0.19 kg

Weight of box of 14 units: 2.87 kg

No hay información BC3 disponible

Battery systemControl systemEmergencyMainsType*DurationBatteryColourWarrantyCertificationsPart number
Self-containedAutoTest600 lmNM1 h6.4V-1.5Ah LiFePOâ‚„White5 YearsCE UK CMIMLYP3600LX
Self-containedDALI2390 lm235 lmM/NM1 h3.2V-1.5Ah LiFePOâ‚„White5 YearsCE UK CMIMLYP3400LAP
Self-containedWireless SmartZ®390 lmNM1 h3.2V-1.5Ah LiFePO₄White5 YearsCE UK CMIMLYP3400LW
  • *NM: Non-maintained. The luminaire operates from emergency supply only upon failure of the normal mains supply.
  • *M/NM: Maintained/Non Maintained. With a third terminal which allows to switch off/on the Maintained mode when connected to mains supply.
SMARTZ CONTROL UNIT+ UPS CSZ002+SAI002 230V/5Vcc
Reference
CSZ003
Technical datasheet
CE declaration of conformity
UKCA declaration of conformity
Morocco Declaration of Conformity
Installation manual
Photometric file
Product images
Series datasheet