XENA FLAT
SPECIFICATION
- Wall: Surface and Recessed
- Ceiling: Surface and Recessed
- Polycarbonate body
- Diffuser: Transparent Polycarbonate
- IP44
- IK07
- 150 lm – 300 lm
- Duration: 3 h · Battery: LiFePO4
- Charging time: 12 h
- Supply: 230 V – 50 Hz
- LED temperature: 4000 ºK
- Working temperature: 0 ºC to +40 ºC AutoTest
- Warranty 6 year
Download:
Download Declaration of Conformity
Available with:LiFePO4 Technology
Technical information
AutoTest
Emergency | Mains | Type* | Dur. | Battery | Ref. |
150 lm | - | NM | 3 h | 3.2V 1.5A/h LFP | LXF9150LX3T |
150 lm | 90 lm | M/NM | 3 h | 3.2V 1.5A/h LFP | LXF9150LXP3T |
300 lm | 180 lm | M/NM | 3 h | 3.2V 3.0A/h LFP | LXF9250LXP3T |
DALI
Emergency | Mains | Type* | Dur. | Battery | Ref. |
150 lm | 90 lm | M/NM | 3 h | 3.2V 1.5A/h LFP | LXF9150LAP3T |
*NM: Non Maintained. The luminaire operates from emergency supply only upon failure of the normal mains supply.
*M/NM: Maintained/Non Maintained. With a switch which allows to select Maintained or Non Maintained mode funtion.
For version in black colour, add an ‘N’ at the end of the reference.
Here you can download the technical sheets and photometric curves corresponding to each reference:
AutoTest
Ref. | Tech Sheet | Photometry |
LXF9150LX3T | Tech Sheet | LDT |
LXF9150LXP3T | Tech Sheet | LDT |
LXF9250LXP3T | Tech Sheet | LDT |
Download installation manual, electrical connection / test and instructions for use:
Xena Flat
- EN-60598-2-22
- AutoTest: EN-62034
- Wireless: ETSI EN 300 220